Rational and VFP Numbers

From NARS2000
Jump to navigationJump to search

Introduction

Rational numbers complement the 64-bit integer datatype to provide infinite precision (or WS FULL) at the cost of some performance. Similarly, Variable-precision Floating Point (VFP) numbers complement the 64-bit floating point datatype to provide more precision (as much as the user cares to specify) again with some cost in performance.

There is no separate datatype for infinite precision Integers. Instead, they are represented as a special case of rational numbers. In the discussion below, the phrase rational integer means a rational number whose denominator is one.

Rationale

Simply put: precision. If the 53 bits of precision in the floating point result of 2÷3 is not enough, you now have two more choices: one as an exact number, and one as a decimal number with as much precision as you care to specify.

For example,

      2*200
1.6069380442589903E60
      2*200x
1606938044258990275541962092341162602522202993782792835301376
      ○1
3.141592653589793
      ○1x
3.1415926535897932384626433832795028841971693993751058209749

Constants

Rational constants may be entered as follows:

  • 123x for the constant 123 (the suffix x is but a shorthand for r1)
  • 123r4567 for the constant 123÷4567

VFP constants may be entered as follows:

  • 123v for the constant 123
  • 123v4567 for the constant 123.4567
  • 123v4567e3 for the constant 123.4567e3

The above formats for constants (except for the suffix x) may be used in other constants such as 1r4p2 to generate a shorter and more accurate value for π2/4 than, say, ((○1)*2)÷4.

Precision

Rational numbers have infinite precision. They are stored with a separate numerator and denominator, both of which are exact numbers in the sense that their size (and hence precision) grows limited only by the available workspace.

VFP numbers have user-controlled variable precision, and each number may have a different precision. The default precision at startup is controlled by the value of the system variable ⎕FPC. The system default of this value is 128 in units of bits of precision of the mantissa (the digits) of the number, not counting the exponent (which is of fixed size). The current precision may be changed as needed by assigning a new value to the system variable. All newly created VFP numbers will have the new precision – the precision of VFP numbers already present in the workspace does not change.

Generally, precision is set once for a particular application and unchanged thereafter. Although not recommended, it is possible to mix VFP numbers of different precisions in a single array – presumably you really know what you are doing. The system function ⎕DR can be used to display an array's precision(s).

Datatype Propagation

Generally, the datatype of constants propagates through a calculation.

An example from the programming problems site ProjectEuler.net illustrates this point. Problem #48 asks what are the low-order ten digits of the sum of the first thousand instances of NN?

The obvious expression ¯10↑⍕+/N*N←⍳1000 at first sight seems to solve the problem until you realize that it quickly runs afoul of the limited precision of 64-bit integer and floating point numbers. Clearly, this is a problem for the infinite precision of rational integers.

As ⍳1000 generates the first thousand integers as an integer (actually an Arithmetic Progression Array) datatype, ⍳1000x generates the same values as rational integers. Next, N*N←⍳1000x generates the first thousand instances of NN as exact rational integers, and unlike its integer counterpart, there is no overflow to floating point. Then, +/N*N←⍳1000x sums them into a single 3001-digit rational integer, and finally ¯10↑⍕+/N*N←⍳1000x converts the large integer to characters and extracts the low-order ten digits — 9110846700 — all in a small number of milliseconds.

Note how we started with an obvious expression that failed because of its limited precision, and changed it to suffix the constant 1000 with an x to convert it to a rational integer which then propagates through the calculation with infinite precision to yield the correct result.

Formatting

Rational integers are displayed as an integer with no special adornment; rational non-integers are displayed as a numerator and denominator separated by an r as in 34r9. As with the integer datatype, the numerator and denominator of a rational number are formatted exactly, unaffected by ⎕PP.


      !40
8.159152832478977E47
      !40x
815915283247897734345611269596115894272000000000
      +\÷⍳10x
1 3r2 11r6 25r12 137r60 49r20 363r140 761r280 7129r2520 7381r2520

VFP numbers are formatted as decimal numbers to the precision inherent in the number or ⎕PP, whichever is smaller. For example,

      ⎕PP←100
      ⎕FPC←64
      ○1
3.141592653589793
      ○1x
3.14159265358979323851
      ⎕FPC←128
      ○1x
3.141592653589793238462643383279502884195

where both of the above displays were limited by the precision of the number, not ⎕PP.

However the first of the following displays is limited by ⎕PP:

      ⎕FPC←128
      ⎕PP←20
      !40v
81591528324789773435E28
      ⎕PP←80
      !40v
815915283247897734345611269596115894272000000000

In other words, if a VFP integer appears in E-notation, it means that ⎕PP is too small to show all of its significant digits.

Datatype Promotion

For the most part, rational numbers beget rational numbers and VFP numbers beget VFP numbers. However, when irrational, transcendental, and certain other functions are used, rational numbers beget VFP numbers. For example,

      *1
2.718281828459045
      *1x
2.718281828459045235360287471352662497759

where the datatype of the two results are floating point and VFP, respectively. That is, in a manner similar to how some primitive functions with integer arguments may return floating point results, when a rational number is used as an argument to a primitive function that can't return a result with infinite precision, it returns a VFP number.

The reason irrational, transcendental, and certain other functions on rational numbers don't return rational numbers is that, by definition, the result of such a function is, in general, not representable as a rational number; instead, VFP numbers are better suited to represent irrational results where the end user may control exactly how much precision is desired in an obviously inexact number.

Two special functions are the prime decomposition (πR)/number theoretic (LπR) functions. In order to return accurate results over a wide range of precision, all numeric arguments are converted to rational integers and the result is returned as a rational integer.

The list of functions that produce VFP numbers given rational numbers is as follows:

  • Power: *R and L*R (except when R is a 32-bit integer, in which case the result is a rational number)
  • Logarithm: ⍟R and L⍟R
  • Pi Times and Circle functions: ○R and L○R
  • Root: √R and L√R
  • Factorial and Binomial: !R and L!R (except when the arguments are rational integers, in which case the result is a rational integer)

Beyond the ones mentioned above, the list of functions that don't produce a rational or VFP result given those argument(s) is as follows:

  • Depth: (Integer)
  • Dyadic Comparison: = ≠ < ≤ ≥ > ≡ ≢ (Boolean)
  • Nand and Nor: ⍲ ⍱ (Boolean)
  • Grade Up/Down: ⍋ ⍒ (Integer)
  • Index Of: (Integer)
  • Member Of: (Boolean)
  • Find: (Boolean)
  • Subset and Superset: ⊆ ⊇ (Boolean)
  • Format: (Character)

Otherwise, rational argument(s) produce rational result(s) and VFP argument(s) produce VFP result(s).

Datatype Demotion

It is common in APL implementations to demote datatypes where appropriate. For example, the constant 1.0 might actually be represented as an integer or even Boolean datatype. The idea is there is no loss of precision and the storage is typically smaller which might lead to a more efficient algorithm when next used, so why not?

With rational and VFP numbers those reasons no longer apply. While the constant 1x might have the same precision as the constant 1.0, the difference in latent precision between the two is vast. In fact, in order for datatype propagation of rational and VFP numbers to work at all, we must be careful not to demote them automatically to a smaller datatype. Otherwise, it would require an intolerable degree of analysis on the part of the programmer to ensure that the desired datatype (rational or VFP) remains in effect throughout a calculation.

Conversions

To convert manually from one datatype to another,

  • Integer to rational, use 0x+
  • Integer, floating point, or rational number to VFP, use 0v+
  • Rational integer to a 64-bit integer (possibly losing some precision), use ⍎⍕
  • Rational non-integer to a floating point number (possibly losing some precision), use ⍎⍕0v+
  • VFP number to a floating point number (possibly losing some precision), use ⍎⍕
  • VFP number to rational — at the moment, no APL method exists although the underlying libraries do have such a function

Comparisons

  • Comparisons between two rational numbers or a rational number and any other integer is exact — just as they are between integers.

  • Comparisons between a VFP number and any other number is sensitive to ⎕CT — just as they are between floats.

That is, comparisons continue the analogy between integers and rationals as well as floats and VFPs.

Integer Tolerance

Both rational and VFP numbers may be used where the system ordinarily requires an integer (such axis coordinates, indexing, left argument to structural primitives, etc.) just as the system tolerates floating point numbers in those contexts if they are sufficiently near an integer. In all cases, the system attempts to convert the non-integer to an integer using the fixed system comparison tolerance (at the moment, 3E¯15).

Infinities

Support for ±∞ has been extended to rational and VFP numbers in the same manner as it applies to 64-bit integers and 64-bit floats. That is, the same cases covered by the system variable ⎕IC (Indeterminate Control) also apply to infinite rational and VFP numbers. Moreover, infinite numeric constants may be entered, for example, as

  • ∞x
  • ∞r1
  • ∞v
  • ∞v0

Also constants such as 2r∞ resolve to 0x.

New And/Or Different Behavior

  • Both roll (?R) and deal (L?R) on rational integers use a built-in random number generator so as to use the entire range of rational integers – this algorithm uses its own internal seeds that are much more complicated than the simple integer seed that is ⎕RL. Thus ⎕RL is unchanged by these functions on rationals.

    For example, if you need really large random numbers

          ?10*60x
    370857192605742854709703007683731949504799559659692534573173

  • At the moment, matrix inverse (⌹R) and matrix division (L⌹R) on rational or VFP arguments each have two limitations above and beyond that of normal conformability:

    • for a square right argument that it be non-singular, and

    • for an overdetermined (>/⍴R) right argument that the symmetric matrix (⍉R)+.×R be non-singular.

    These limitations are due to the FLINT library used to implement Matrix Inverse/Divide on rational and VFP numbers.

    Integer and floating point arguments are not subject to these limitations because they use a more general algorithm (Singular Value Decomposition) that produces a unique result even for singular arguments (e.g., ⌹5 3⍴0).

Conclusions

The new datatypes offer several benefits:

  • They extend the precision of existing integer and floating point datatypes to a much greater level.
  • As integer blows up to floating point, rational blows up to VFP, providing a natural parallel progression for irrational and transcendental primitive functions.
  • Datatype propagation without demotion allows one to code an algorithm in either of the new types easily and without the need for detailed analysis of the datatype in intermediate results.
  • All primitives extend naturally to encompass the new types as numbers.
  • The notation for constants builds on existing point notation formats.

Acknowledgments

The designers of J are thanked for having the foresight to include rational numbers as a separate datatype.

The following GPL libraries have been used to provide support for these datatypes:

  • MPIR (Multiple Precision Integers and Rationals) at mpir.org.
  • MPFR (Multiple Precision Floating-Point Reliable Library ) at mpfr.org.
  • FLINT (Fast Library for Number Theory) at flintlib.org.